English 
 |
| Quantity: | |
|---|---|
NS-5N
Farmate
As part of Farmate’s “efficiency” lineup, this sprayer prioritizes speed, coverage, and weather resistance—addressing the challenges of large-scale outdoor spraying, such as slow coverage, uneven mist, and damage from sun/rain. Supplied as 1 unit, it comes with a pre-attached wand and a quick-start guide, so you can begin spraying within 5 minutes of unboxing. Whether you’re fertilizing a residential lawn, treating a large flower bed for weeds, or maintaining a small park’s green spaces, the NS-5F delivers wide, even coverage that cuts down on task time while ensuring consistent results.
The NS-5F’s key feature is its 12cm-wide fan nozzle, which produces a uniform, fan-shaped spray (12cm wide at 1 meter distance) that covers more area per pass than standard nozzles. This design reduces the number of passes needed to cover large spaces: for example, a 100-square-meter lawn takes only 20 passes with the NS-5F, compared to 40 passes with a narrow-spray sprayer. The nozzle is made from impact-resistant ABS plastic with a UV-protective coating, so it won’t fade or crack under direct sunlight. It also offers two fan settings: wide (12cm) for lawns/flower beds and narrow fan (6cm) for targeted broad coverage (e.g., along garden borders). The nozzle’s angle is adjustable (0-90 degrees), letting you spray horizontally (for lawns) or vertically (for tall flower beds).
Equipped with a high-efficiency manual pump, the NS-5F reaches maximum pressure (0.7MPa) in just 5-6 full strokes—half the time of standard sprayers. This quick pressurization means less time pumping and more time spraying: you can build enough pressure to cover a 20-square-meter area in 10 seconds of pumping. The pump handle features a soft, non-slip grip that reduces hand fatigue, even during long sessions (e.g., spraying a 300-square-meter park lawn). A pressure gauge on the pump lets you monitor pressure levels, ensuring you maintain consistent spray—no guesswork involved. The pump also has a built-in pressure relief valve that releases excess pressure automatically, protecting the tank and wand from damage.
The sprayer’s 5L tank is crafted from UV-stabilized HDPE plastic, which resists fading, cracking, and warping when exposed to direct sunlight (common in lawn care, where sprayers are used for hours on hot days). The tank’s opaque design also protects light-sensitive solutions (e.g., some herbicides that break down in sunlight) from degrading, ensuring the solution remains effective. The tank features a wide-mouth opening (10cm diameter) for easy refilling (even with thick solutions like lawn fertilizer) and a removable filter at the inlet (to prevent debris from clogging the nozzle). A sturdy handle on the top of the tank makes it easy to carry, even when full, and the tank’s flat bottom ensures it stands securely on the ground during refilling.
Homeowners with lawns (100-300 square meters) will find the NS-5F a time-saver. The fan nozzle’s wide coverage lets you apply lawn fertilizer, weed killer, or moss remover quickly—covering a 150-square-meter lawn in 30 minutes, compared to 1 hour with a standard sprayer. The quick-pressurization pump reduces hand strain, and the UV-resistant tank stands up to hot summer afternoons. For lawns with uneven terrain, the adjustable nozzle angle ensures you can spray slopes or raised areas without missing spots. The 5L tank covers approximately 100 square meters per fill, so you’ll only need 1-3 refills for most residential lawns.
Owners of large flower beds (e.g., 200-square-meter mixed perennial beds) will appreciate the NS-5F’s even coverage. The fan nozzle delivers mist that coats flower foliage without bending delicate stems, and the two fan settings let you switch between wide coverage (for open beds) and narrow fan (for border edges). The sprayer’s lightweight design (6.5kg when full) makes it easy to carry between flower beds, and the UV-resistant tank ensures it lasts for years of outdoor use. Whether you’re applying insecticides to rose beds or watering newly planted bulbs, the NS-5F ensures every plant gets consistent treatment.
Maintenance teams for small parks, community green spaces, or corporate campus lawns will rely on the NS-5F’s efficiency. Its wide coverage lets teams cover 300-400 square meters per hour, and the quick-pressurization pump means multiple team members can use it without fatigue. The UV-resistant tank stands up to daily outdoor use, and the easy-to-clean design (rinse with water after use) saves time between tasks. For parks with mixed areas (lawns, flower beds, shrubs), the adjustable nozzle angle and fan settings cater to all needs, making the NS-5F a versatile tool for daily maintenance.
With the wide fan setting (12cm), the 5L tank covers approximately 100-120 square meters (depending on the solution’s dilution rate and spray pressure). For lawn fertilizer (typically diluted 1:10), this means one tank covers a 100-square-meter lawn. For more concentrated solutions (e.g., herbicides diluted 1:50), coverage can reach 150 square meters per tank.
The fan nozzle is designed to produce uniform spray with minimal overlap. We recommend overlapping passes by 2-3cm (about 1 inch) to ensure no spots are missed—this is less overlap than standard narrow-spray nozzles (which require 5-6cm overlap). The even spray pattern also reduces waste, as solution is distributed evenly rather than pooling in some areas.
The NS-5F is water-resistant (IPX4 rating), so it can be used in light rain without damaging the pump or tank. However, we recommend avoiding heavy rain, as it can dilute the solution (reducing effectiveness) and wash chemicals off plants before they’re absorbed. The pump’s moving parts are sealed to prevent water ingress, so light rain won’t cause rust or corrosion.
With proper care (cleaning after each use, storing in a dry place, and lubricating the pump every 3 months), the NS-5F can last 3-5 years. The UV-resistant HDPE tank and impact-resistant nozzle are designed for long-term outdoor use, and replacement parts (e.g., pump seals, nozzles) are available if needed. Most users find that the sprayer requires no major repairs during its lifespan.
As part of Farmate’s “efficiency” lineup, this sprayer prioritizes speed, coverage, and weather resistance—addressing the challenges of large-scale outdoor spraying, such as slow coverage, uneven mist, and damage from sun/rain. Supplied as 1 unit, it comes with a pre-attached wand and a quick-start guide, so you can begin spraying within 5 minutes of unboxing. Whether you’re fertilizing a residential lawn, treating a large flower bed for weeds, or maintaining a small park’s green spaces, the NS-5F delivers wide, even coverage that cuts down on task time while ensuring consistent results.
The NS-5F’s key feature is its 12cm-wide fan nozzle, which produces a uniform, fan-shaped spray (12cm wide at 1 meter distance) that covers more area per pass than standard nozzles. This design reduces the number of passes needed to cover large spaces: for example, a 100-square-meter lawn takes only 20 passes with the NS-5F, compared to 40 passes with a narrow-spray sprayer. The nozzle is made from impact-resistant ABS plastic with a UV-protective coating, so it won’t fade or crack under direct sunlight. It also offers two fan settings: wide (12cm) for lawns/flower beds and narrow fan (6cm) for targeted broad coverage (e.g., along garden borders). The nozzle’s angle is adjustable (0-90 degrees), letting you spray horizontally (for lawns) or vertically (for tall flower beds).
Equipped with a high-efficiency manual pump, the NS-5F reaches maximum pressure (0.7MPa) in just 5-6 full strokes—half the time of standard sprayers. This quick pressurization means less time pumping and more time spraying: you can build enough pressure to cover a 20-square-meter area in 10 seconds of pumping. The pump handle features a soft, non-slip grip that reduces hand fatigue, even during long sessions (e.g., spraying a 300-square-meter park lawn). A pressure gauge on the pump lets you monitor pressure levels, ensuring you maintain consistent spray—no guesswork involved. The pump also has a built-in pressure relief valve that releases excess pressure automatically, protecting the tank and wand from damage.
The sprayer’s 5L tank is crafted from UV-stabilized HDPE plastic, which resists fading, cracking, and warping when exposed to direct sunlight (common in lawn care, where sprayers are used for hours on hot days). The tank’s opaque design also protects light-sensitive solutions (e.g., some herbicides that break down in sunlight) from degrading, ensuring the solution remains effective. The tank features a wide-mouth opening (10cm diameter) for easy refilling (even with thick solutions like lawn fertilizer) and a removable filter at the inlet (to prevent debris from clogging the nozzle). A sturdy handle on the top of the tank makes it easy to carry, even when full, and the tank’s flat bottom ensures it stands securely on the ground during refilling.
Homeowners with lawns (100-300 square meters) will find the NS-5F a time-saver. The fan nozzle’s wide coverage lets you apply lawn fertilizer, weed killer, or moss remover quickly—covering a 150-square-meter lawn in 30 minutes, compared to 1 hour with a standard sprayer. The quick-pressurization pump reduces hand strain, and the UV-resistant tank stands up to hot summer afternoons. For lawns with uneven terrain, the adjustable nozzle angle ensures you can spray slopes or raised areas without missing spots. The 5L tank covers approximately 100 square meters per fill, so you’ll only need 1-3 refills for most residential lawns.
Owners of large flower beds (e.g., 200-square-meter mixed perennial beds) will appreciate the NS-5F’s even coverage. The fan nozzle delivers mist that coats flower foliage without bending delicate stems, and the two fan settings let you switch between wide coverage (for open beds) and narrow fan (for border edges). The sprayer’s lightweight design (6.5kg when full) makes it easy to carry between flower beds, and the UV-resistant tank ensures it lasts for years of outdoor use. Whether you’re applying insecticides to rose beds or watering newly planted bulbs, the NS-5F ensures every plant gets consistent treatment.
Maintenance teams for small parks, community green spaces, or corporate campus lawns will rely on the NS-5F’s efficiency. Its wide coverage lets teams cover 300-400 square meters per hour, and the quick-pressurization pump means multiple team members can use it without fatigue. The UV-resistant tank stands up to daily outdoor use, and the easy-to-clean design (rinse with water after use) saves time between tasks. For parks with mixed areas (lawns, flower beds, shrubs), the adjustable nozzle angle and fan settings cater to all needs, making the NS-5F a versatile tool for daily maintenance.
With the wide fan setting (12cm), the 5L tank covers approximately 100-120 square meters (depending on the solution’s dilution rate and spray pressure). For lawn fertilizer (typically diluted 1:10), this means one tank covers a 100-square-meter lawn. For more concentrated solutions (e.g., herbicides diluted 1:50), coverage can reach 150 square meters per tank.
The fan nozzle is designed to produce uniform spray with minimal overlap. We recommend overlapping passes by 2-3cm (about 1 inch) to ensure no spots are missed—this is less overlap than standard narrow-spray nozzles (which require 5-6cm overlap). The even spray pattern also reduces waste, as solution is distributed evenly rather than pooling in some areas.
The NS-5F is water-resistant (IPX4 rating), so it can be used in light rain without damaging the pump or tank. However, we recommend avoiding heavy rain, as it can dilute the solution (reducing effectiveness) and wash chemicals off plants before they’re absorbed. The pump’s moving parts are sealed to prevent water ingress, so light rain won’t cause rust or corrosion.
With proper care (cleaning after each use, storing in a dry place, and lubricating the pump every 3 months), the NS-5F can last 3-5 years. The UV-resistant HDPE tank and impact-resistant nozzle are designed for long-term outdoor use, and replacement parts (e.g., pump seals, nozzles) are available if needed. Most users find that the sprayer requires no major repairs during its lifespan.